
Custom garage doors
Custom garage doors in Nashville and Middle Tennessee, designed for the house they hang on.
A custom door starts with the house. Clay Caro works through the choices with you or your builder, from real wood to a design nobody else has, and then his team installs it.
Get in touch with us at (615) 810-6415
Why put this much thought into a garage door?
Because on a lot of houses it’s the biggest thing on the front. When the garage faces the street, its doors can make up more than half of what people see from the curb. That’s a lot of house to leave to whatever happened to be in stock.
It’s also a hard thing to choose. People in the trade say garage doors are the hardest product there is to sell, because the options never run out. Clay’s job is narrowing them down.
Where do the choices start?
With one of five kinds of door. Everything else, the design, the color, the glass, follows from which one you pick.
- Real wood. Doors from Carriage House Door Company, real wood with the upkeep that comes with it: real wood garage doors.
- LP siding. National PreFinish doors faced in LP, the look of wood with far less maintenance: LP siding garage doors.
- Full view glass. Amarr doors that are glass from top to bottom: full view glass garage doors.
- Traditional. Amarr steel doors, raised panel to flush, with glass or without: traditional garage doors.
- Commercial. Doors for shops, warehouses and businesses, which we install as well: commercial garage doors.
What does Clay bring to it?
An eye for how a door sits on a house. Custom doors are where Clay spends more and more of his own time, and he’s the person to talk to about Carriage House, National PreFinish and Amarr. He grew up helping on his father’s jobs, so the mechanical side comes with the design side: a door that looks right also has to balance, seal and run on an opener chosen for its weight.
Do you work with builders?
All the time. A builder contacts us for the job, and on most custom homes we work as the builder’s garage door subcontractor; homeowners building their own house can call us directly too. Either way it helps to talk about the door before the framing is done, since the opening size and the headroom decide what’s possible.
Is it time to replace your door?
Only when fixing it stops making sense, and we’ll tell you which yours is. That usually means several sections bent, cracked or rusted through with no matching ones still made, an old solid wood door that has rotted, or simply a door you’re tired of looking at. Under an HOA, get their guidelines on style and glass before you fall for a design, and we’ll choose from doors that fit them.
A new door also changes the job your opener does. A heavier door may need a stronger opener and different springs, so we check the one you have before you order. Clay will give you a real number for your door, over the phone at (615) 810-6415 or standing in your driveway.
What about an old one-piece door?
Replace it, and rework the opening with it. A one-piece door tilts out and up as a single slab on heavy side springs, swinging toward whoever is standing in the drive. Older garages often have openings in sizes nobody makes anymore and ceilings too low for a sectional door, its track and an opener, so we frame the opening down to a modern size first. Then the new door goes in with springs matched to its weight, usually with an opener for the first time; where the ceiling is still tight, a LiftMaster jackshaft opener mounts on the wall beside the door.
You can show us the garage first on FaceTime or Zoom. The header, the ceiling and the walls on each side of the opening are enough for us to say whether a conversion will work.
What should you decide first?
Which of the five you’re starting from, because it sets the budget and the upkeep for everything after it. Real wood is the most work to own; LP siding gives the wood look with less of it; full view glass and traditional steel come in Amarr’s colors or Sherwin-Williams factory paint.
Then the details inside that choice: the edge profile and the stain on a wood door, the layers and the texture on an LP door, the tint of the glass, the panel design on a traditional door. Weight belongs on the list early, too. A heavy door needs springs and an opener chosen for its weight and size, and it’s much easier to plan for that than to find out on install day.
Answers
Custom garage doors: questions people ask
How much does a custom garage door cost?
It moves with the kind of door, the size, the insulation and the glass, and stained real wood sits at the top. A heavy door also needs springs and an opener sized to its weight. Clay will price your door once the main choices are made, and he can show you where each one moves the number.
Can you get a garage door made in a custom size?
Usually, yes. Manufacturers build doors in many widths and heights beyond the standard ones, and custom wood makers build to the opening. If the opening is unusual, we measure it and order to fit, or reframe it when that makes more sense.
Can my builder order the garage door through you?
Builders contact us for the job, and on most custom homes we work as their garage door subcontractor; we don’t set up builder accounts. The homeowner still picks the door with Clay, and it goes best when we’re brought in before the opening is framed.
Which garage door brands do you carry?
Carriage House Door Company for real wood, where we’re an authorized distributor; National PreFinish for LP siding doors; and Amarr for full view glass and traditional steel doors. For openers we’re an authorized LiftMaster installer and service provider.
Is a custom garage door worth the money?
On a house where the garage faces the street, it often is. The door takes up a big share of the front, it gets used every day, and a custom one can be specified for the insulation, glass and opener the garage actually needs instead of whatever a supplier had on hand.